Microchip公司的PIC32MZ EF系列是高达250MHz的集成浮点单元(FPU),具有广泛的外设和包括局域网(CAN)的极好的连接选择,工作电压2.1V到 3.6V,DSP增强核具有四
An interrupt is an internal or external event that requires quick attention from the controller. The PIC32MZ architecture provides a rich interrupt system that can manage up to 190 sources of inte
In my last post I implement "Key Debounce" with port polling, port polling is not very efficient. And this time, I will use change notification instead of port polling. It generates interrupt and
In my older blog "PIC32MZ tutorial -- Key Debounce", I shows how to acheive key debounce with port polling. At this moment, I write an application which uses External Interrupt. Therefore, only ge
经过千辛万苦,今天终于完工PIC32MZ EC Starter Kit的ethernet bootloader项目。我将整个项目, 命名为PhnBootloader。它分为两个部分。第一个部分是PC 端的host程序PhnLoader_v3.0。另一部分是单片机端boot程序PhnBo
At this moment, I accomplish the interface of UART communication for PIC32MZ EC Starter Kit. This interface configures the PIC32MZ for communication with a host PC at 115200 baud. There are five f
Core Timer is a very popular feature of PIC32 since it isa piece of the MIPS M4K core itself and is common to all MIPS processors. Most RTOS's timer are based on core timer. This timer has a f
The microcontroller is PIC32MZ2048ECH144 on the PIC32MZ EC Starter Kit. This microcontroller has four 32-bit synchronous timers are available by combining Timer2 with Timer3, Timer4 with Timer5, T
趁热打铁,在上一PIC32MZ UDP ethernet bootloader的基础上我又完成了采用TCP协议的PIC32MZ ethernet bootloader。两款ethernet bootloader基本架构都一样,数据包格式也一样。TCP ethernet bootloader 也分两部
Today I accomplish a simple application for PIC32MZ EC Starter Kit. This application uses Input Capture feature of PIC32MZ. The Input Capture module captures the 32-bit value of the selected Time
Today I implement "Hello World" on PIC32MZ EC starter kit. The application of "Hello World" only lights up a LED. There are three LEDs on the starter kit board -- LED1 and LED2 and LED3. At the mo
Today I accomplish a application on PIC32MZ EC Starter Kit. The feature of application is to light up LED when key released and put out LED when key pressed. LED is the Starter Kit LED1 connecting
Output Compare is a powerful feature of embedded world. The PIC32 Output Compare module compares the values stored in the OCxR and/or the OCxRS registers to the value in the selected timer. When a
Today I finish the "Blinky LED" application on PIC32MZ starter kit. This application let LED1 blink with 0.5HZ frequency. The pseudo code is like LOOP: LED ON Delay 1 second LED OFF D
In my previous blog "PIC32MZ tutorial -- Output Compare", I shows how to apply Output Compare without interrupt to generate PWM signal. I also tried the Output Compare interrupt. I selected OC to
Watchdog is a very necessary module for embedded system. Someone said that embedded system operates without watchdog enabled just like the car without air bag. You should always enabled watchdog a
目前大部分电子产品在用户体验升级方面通常从交互方式入手,而通常的思路就是将传统按键交互来使用GUI来替代。工程师面临着一个设计难题:MCU在图形处理方面相比SoC有着很大的短板,而在某些计算和图形处理方面不是很
大联大控股宣布,其旗下品佳推出基于美国微芯科技公司(Microchip)的PIC32MZ系列MCU的VR应用解决方案。
PIC32MZ EF系列是Microchip首个符合汽车电子委员会制定的AEC-Q100一级(-40至125°C)规范的PIC32 MCU产品系列
回合解决方案已经推出了物联网的无线上网乒乓球其(IOT)边缘节点,灵活而强大的硬件平台,将现场设备连接到云。支持小尺寸主板具有强大的Microchip的PIC32MZ 32位MCU和一个高速蜂窝泰利特(Telit)模块的RTOS是基于模块